Title: | Mfg Hrly I (Cushion Fill) |
---|---|
ID: | 32694 |
Date Posted: | Jul 9, 2020 |
Date to Apply By: | N/A |
Reports To or Hiring Manager: | Jennifer Gervais |
Department: | 674335 |
Shift: | Mon-Thurs 6a-4:30p, Fri-Sun 6:00am-6:30pm |
Grade Level: | 9 |
Employment Type: | Full Time Non-Exempt |
Location: | Claremont, NC |
Proposed Salary Range: | N/A |
POSITION SUMMARY:
Assemble pre-constructed wooden furniture to specifications for upholstered furniture frames. Attach springs onto completed furniture frames.
PRIMARY FUNCTIONS:
-
Assembling frame on Progressive Upholstery Line
-
Obtain pre-constructed frame parts from frame grinder by pushing, pulling and lifting onto work station.
-
Assemble the frame parts assuring they are square and level, with correct parts orientated to the correct direction and all parts flush to outside of frame using a hammer and nails, staples and appropriately applied glue.
-
Assure all parts are ground off level to result in as flush an outside edge as possible and that no staples are on outside of frame.
-
When frame is fully assembled and glue dried, lift and place the frame on top of workstation.
-
Inspect frame for rough spots or poor joints.
-
Spring up by pulling correct no sag springs over the spring up clips and attach fiber wire.
-
According to spring up instructions, attach burlap or FLW to the frame.
-
Using a staple/nail gun, shoot the front edge rope into place on the frame.
-
Other duties as assigned.
MINIMUM QUALIFICATIONS:
-
Up to 5 years’ experience in production of high-end upholstery frames.
-
Experience in reading and understanding production tickets
-
Ability to interpret simple frame assembly instructions commonly placed in frame assembly manual
-
Ability to perform multiple tasks in a fast-paced environment to assure delivery requirements
-
Ability to read, write and understand English
-
Ability to maintain accurate records and follow documented procedures and standards
-
Excellent time-management skills including ability to work independently with little supervision
-
Ability to frequently lift frames weighing up to 50lbs
-
Ability to stand for 10-hour periods
-
Ability to bend and twist as required to assemble frames